B-TAB


B-TAB Instruction Sheets Construction: - Forged Aluminum - Weight: - 50g - Mount Requirements: - Bracket is 10mm in width - Compatible - 31.8mm Low profile machined aluminum design can run standard bottles or the Aero HC. The included Side Axis Kage is ideal for BTA mounts where the natural movement is to pull the bottle sideways. The cage body can be flipped for either right side or left side removal.  - The B-TAB can be rotated to conveniently mount an extra water bottle vertically on your handlebar



FC Hydration System


New Profile Design FC Hydration Systems were designed with one thing in mind – to create a clean front-end solution that thoughtfully integrates hydration, nutrition and electronic needs. Integrated storage streamlines nutrition needs into rear airfoil compartment - Computer mount positions perfectly at the front of the system for optimal viewing. - Reverse the mounting bracket for lower profile and substantially increased aerodynamic performance. Click here to see installation guide - Strategically flexible to fit your preferences. A simple turn of the dial positions straw on the right or leftside of the bottle. - Swap straw with gap cap to place straw in the front or rear of bottle. - Mounts to the Aerodrink Bracket. Fits on aerobars down to 65mm apart (center to center) at its narrowest. Install included bracket extenders for up to 140mm maximum width. Have an even wider setup? FC System also mounts to the Basebar Bracket.  - Brand new patent-pending refill port shields splash back. Construction: - BPA-Free, Foodsafe HDPE Bottle - Colors: - Matte Black or White Bottle - Capacity: - FC25 - 25oz (739ml), FC35 - 35oz (1035ml) - Width: - 70mm - 140mm (center to center) - Weight: - FC25: 397g, FC35: 470g



Bite Valve


Replacements for Aerodrink and Insulated Aerodrink Systems. Includes both hard and flexible straws, yellow mesh, rubber bands, Velcro pieces, foam disk and cap. Materials: - FoodSafe/BPA Free Silicone *FoodSafe, BPA Free, Dishwasher Safe - Compatibility: - FC25, FC35, AeroHC, Aerodrink, Aqualite - Tube ID: - 10mm (.39 inches) - Color: - White and Grey




Replacement Items Included with Kit: - Yellow mesh, rubber bands, refill cap, foam disk, Velcro pieces, two straws (soft and flexible). For Aerodrink or Insulated Aerodrink Systems.  Replacements for Aerodrink and Insulated Aerodrink Systems. Includes both hard and flexible straws, yellow mesh, rubber bands, Velcro pieces, foam disk and cap.




Lightweight aluminum crossbars mount to aerobar extensions for simple between-the-arms system for mounting a standard bottle cage. Easily and securely attaches to extensions up to 130mm (center-to-center) in width. Can mount above or below extensions for optimal bottle positioning. - Compatible for mounting the Aero HC Bottle to accommodate wider or narrower aerobar setups. Weight: - 24g (pair, crossbars only) - Construction: - 6061-T6 Aluminum. Available 2 ways: with or without Profile Design Kage.




Innovative front hydration bracket mounts to the basebar. The unique design allows for independent width and angle adjustments of hydration system without impacting aerobars. - Mounts Aerodrink, Insulated Aerodrink, Aqualite or Aquacell Systems directly to the basebar. - Compatible with a standard bottle cage by simple “click-in” install of included adapter. Weight: - 75g - Construction: - Injected nylon/glass fiber construction. - Basebar Bracket Width Requirement: - 12mm clearance on each side of the stem is required to mount the Basebar Bracket




Secure Velcro bottle mounting system affixes directly to aerobars, placing your favorite hydration solution right where you need it.  - Mounting solution for the Aerodrink, Insulated Aerodrink, Aqualite or Aquacell Systems.  Construction: - Injected nylon/glass fiber construction - Width: - 70mm - 140mm (center to center) - Weight: - 75g




Secure Velcro bottle mounting system affixes directly to aerobars, placing your favorite hydration solution right where you need it.  - Mounting solution for the Aerodrink, Insulated Aerodrink, Aqualite or Aquacell Systems.  Materials: - Injected Nylon/Glass Fiber - Width Adjustment: - 80mm – 140mm (Center – Center) - Compatibility: - FC25, FC35, AeroHC, Standard Bottle, Aerodrink, Aqualite - Extension Clamp Diameter: - 22.2mm - Color: - Black w/Red Strap - Weight: - 130g




Dual chamber design can carry two different formulations. Fill one chamber with water, and the other with your favorite electrolyte solution.  - Separate refill foam caps for each chamber make refueling while on-the-go a snap.  - Compatible with the Universal Aerodrink Bracket, mounting system directly to aerobar extensions.  - Easily fits narrow mounting aerobars or wider setups with our Basebar Bracket.  Capacity: - First Chamber: 27oz (590ml), Second Chamber: 17oz (500ml) - Weight: - 310g




Capacity: - 22oz (650ml) - Weight: - 95g Refill foam cap makes refueling while on-the-go a snap.  - Easily fits narrow mounting aerobars or wider setups with our Basebar Bracket.  - Compatible with the Universal Aerodrink Bracket, mounting system directly to aerobar extensions. 




Bottle is insulated to keep fluids cold for up to 1 hour, and liquids cool for up to 3 hours. Refill foam cap makes refueling while on-the-go a snap.  - Easily fits narrow mounting aerobars or wider setups with our Basebar Bracket.  - Compatible with the Universal Aerodrink Bracket, mounting system directly to aerobar extensions.  Capacity: - 22oz (650ml) - Weight: - 210g - Features: - Maintains the temperature of cold liquids for up to 1 hour. Keeps liquids cool for up to 3 hours.




Refill foam cap makes refueling while on-the-go a snap.  - Easily fits narrow mounting aerobars or wider setups with our Basebar Bracket.  - Compatible with the Universal Aerodrink Bracket, mounting system directly to aerobar extensions.  Capacity: - 28oz (828ml) - Weight: - 171g - Basebar Bracket Width Requirement: - 12mm clearance on each side of the stem is required to mount the Basebar Bracket



Aero HC System


Construction: - BPA-Free, Foodsafe HDPE Bottle, Injected Nylon/Glass Fiber Bracket and Computer Mount - Width: - 85mm-120mm (center to center) - Capacity: - 28oz (828ml) - Weight: - 248g (system), 138g (bracket only) Bracket attaches to the aerobar extensions and offers width adjustment as well as length adjustment. Cage and computer mount are independently length adjustable on the bracket. - Independently adjustable computer mount integrates with the bracket and hides the computer behind the bottle for an additional aerodynamic advantage. - Flip cap for secure, quick and easy on-the-go refill with no splash. - Width of the bracket is controlled by just two bolts to easily adjust to wider or narrower aerobar systems.