"Either Profile Design Equipped These Wheels with Tiny Motors, or They're Naturally Disconcertingly Quick"


Check out the full review at Aerogeeks.com! We, as a sport, tend to have short memories. “Whatever happened to…” is a question that gets thrown around AeroGeeks HQ on a nearly daily basis. In most cases, the answer is simple: nothing happened, but other companies released their own products that weren’t necessarily better, just newer. It’s unfortunate, but it happens. Here’s the thing; most products that end up with this fate are good enough, but not exceptional. Standing out from the crowd is hard, and keeping ahead of ones’ competitors for any significant length of time is harder still. It takes a special something to keep a product stuck in our minds, and we’re starting to think that Profile Design’s TwentyFour Series 58/78 wheels just might have it. We aren’t sure what mojo Profile Design has worked on the braking surface of the 24 Series, but we are reasonably certain that it involves black magic. Wet or dry, the stopping power of the supplied pads, coupled with the brake surface, maintained impressive modulation in everything from the flash-monsoons of Florida to steep, sustained descents and everything in between without so much as a hint of fade – these could well rival Reynolds fabled dry performance when properly bedded in and hitting their stride. When it’s wet out, and the Reynolds are on a different bike, we find ourselves reaching for the 58/78s without much in the way of conscious thought; that speaks volumes to how highly we regard their braking prowess. It isn’t as though the wheels are any slouch in the speed department, either. Profile Design says that they’re quick around Kona, and it’s hard to argue with them when the wheels don’t budge in a crosswind, spin up fast and are absolutely content to hum along at race pace even while out on a training ride. Either PD equipped these wheels with tiny motors or they’re naturally disconcertingly quick. Given they are allowed to run in Kona, we’re going with the latter… but someone ought to pass an x-ray machine over them, just in case. With a 24mm brake track, they fit most of the wider tires that we have in the garage, and don’t complain when we fit normal-width, either, and everything rolls with a smoothness that we expect from a top-shelf set, but the top shelf these are not, at least in terms of price. At about two grand for the 78mm deep set and two hundred less for the 58s, Profile Design has a healthy lead on their competition in the wallet division, and scores well within the same weight class where quality and features are concerned. These are premium wheels for a not-so-premium price.




The revised T3+ Carbon extension brings improved electronic and mechanical shifting cable management to this innovative wrist relief bend. - The new J5 bracket with the streamlined Inline Compression Clamp (ICC), this bar provides single bolt extension adjustment making dialing in your fit simple and easy. - Patent-pending in-line wedge system for reduced drag and even clamping forces. Extension length and rotation easily adjusted with the turn of just one bolt. - The updated offset bridge matched with the F40tt armrest gives the system enormous range of reach and width adjustability. - For additional integration an optional BTA bridge is available. Bracket: - J5 Bracket - Armrest: - F40tt - Stack: - 55mm - 125mm (w/Aftermarket Riser Kits) - Reach: - -24mm to -92.2mm (7.5mm Increments) - Width: - 155mm – 296mm (Center to Center) - Extension Adjustment: - 229mm – 335mm(Center of Basebar to Tip) - Extension Length: - 376mm - Extension Height: - 66mm - Extension Angle: - 40° - Clamp Diameter: - 31.8mm (26.0 w/Shims) - Color: - Black - Weight: - 575g T3+ Carbon Aerobar Instruction Sheets




Bracket: - J5 Bracket - Armrest: - F40tt - Stack: - 55mm - 125mm (w/Aftermarket Riser Kits) - Reach: - -24mm to -92.2mm (7.5mm Increments) - Width: - 155mm – 296mm (Center to Center) - Extension Adjustment: - 218 – 318mm (Center of Basebar to Tip)  - Extension Length: - 353mm - Extension Height: - 90mm - Extension Angle: - 50° - Clamp Diameter: - 31.8mm (26.0 w/Shims) - Color: - Black - Weight: - 585g The revised T1+ Carbon extension brings improved electronic and mechanical shifting cable management to this innovative wrist relief bend. - The new J5 bracket with the streamlined Inline Compression Clamp (ICC), this bar provides single bolt extension adjustment making dialing in your fit simple and easy. - Patent-pending in-line wedge system for reduced drag and even clamping forces. Extension length and rotation easily adjusted with the turn of just one bolt. - The updated offset bridge matched with the F40tt armrest gives the system enormous range of reach and width adjustability. - For additional integration an optional BTA bridge is available. T1+ Carbon Aerobar Instruction Sheets




The revised T4+ Carbon extension brings improved electronic and mechanical shifting cable management to our proven ski-bend extension. - The new J5 bracket with the streamlined Inline Compression Clamp (ICC), this bar provides single bolt extension adjustment making dialing in your fit simple and easy. - Patent-pending in-line wedge system for reduced drag and even clamping forces. Extension length and rotation easily adjusted with the turn of just one bolt. - The updated offset bridge matched with the F40tt armrest gives the system enormous range of reach and width adjustability. - For additional integration an optional BTA bridge is available. Bracket: - J5 Bracket - Armrest: - F40tt - Stack: - 55mm - 125mm (w/Aftermarket Riser Kits) - Reach: - -24mm to -92.2mm (7.5mm Increments) - Width: - 155mm – 296mm (Center to Center) - Extension Adjustment: - 230mm – 337mm(Center of Basebar to Tip)  - Extension Length: - 378mm - Extension Height: - 71mm - Extension Angle: - 30° - Clamp Diameter: - 31.8mm (26.0 w/Shims) - Color: - Black - Weight: - 638g T4+ Carbon Aerobar Instruction Sheets




The T2+ Carbon extension provides an S-Bend with a molded grip offering ergonomics while maintaining aerodynamics. - The new J5 bracket with the streamlined Inline Compression Clamp (ICC), this bar provides single bolt extension adjustment making dialing in your fit simple and easy. - Patent-pending in-line wedge system for reduced drag and even clamping forces. Extension length and rotation easily adjusted with the turn of just one bolt. - The updated offset bridge matched with the F40tt armrest gives the system enormous range of reach and width adjustability. - For additional integration an optional BTA bridge is available. Bracket: - J5 Bracket - Armrest: - F40tt - Stack: - 55mm - 125mm (w/Aftermarket Riser Kits) - Reach: - -24mm to -92.2mm (7.5mm Increments) - Width: - 155mm – 296mm (Center to Center) - Extension Adjustment: - 215mm – 316mm(Center of Basebar to Tip) - Extension Length: - 357mm - Extension Height: - 41mm - Extension Angle: - 0° - Clamp Diameter: - 31.8mm (26.0 w/Shims) - Color: - Black - Weight: - 585g T2+ Carbon Aerobar Instruction Sheets




The T5+ Carbon boasts aggressive ergonomics with a low profile stance, in harmony with perfectly aligned angles. - The new J5 bracket with the streamlined Inline Compression Clamp (ICC), this bar provides single bolt extension adjustment making dialing in your fit simple and easy. - Patent-pending in-line wedge system for reduced drag and even clamping forces. Extension length and rotation easily adjusted with the turn of just one bolt. - The updated offset bridge matched with the F40tt armrest gives the system enormous range of reach and width adjustability. - For additional integration an optional BTA bridge is available. Bracket: - J5 Bracket - Armrest: - F40tt - Stack: - 55mm - 125mm (w/Aftermarket Riser Kits) - Reach: - -24mm to -92.2mm (7.5mm Increments) - Width: - 155mm – 296mm (Center to Center) - Extension Adjustment: - 235mm – 340mm(Center of Basebar to Tip)  - Extension Length: - 380mm - Extension Height: - 55mm - Extension Angle: - 13° - Clamp Diameter: - 31.8mm (26.0 w/Shims) - Color: - Black - Weight: - 638g T5+ Carbon Aerobar Instruction Sheets






03/03/14 - Team Surf City Cyclery


  Profile Design is proud to announce a new partnership with Masters road team, Team Surf City Cyclery/Sterling BMW. The team's 13 riders, including two National Champions, one State Champion and an Olympic silver medalist - will be outfitted with Profile Design bars, stems and new TwentyFour Series wheelsets. They’re already off to a commanding start, having claimed four wins in the opening weeks of 2014. “Team Surf City Cyclery is a massively talented team with a breadth of strengths that make them an unmatchable force in every race they enter,” said Larissa Lewis, Marketing Manager with Profile Design. “The team features a dynamic combination of powerful leadout men and strong sprinters. We’re proud to offer a dynamic product line in which even their most demanding riders can find their optimal fit and speed solutions. We’re honored to extend our partnership with Surf City Cyclery - a premier SoCal dealer whose great sense of camaraderie and love for cycling extends well into the fabric of their team.” “We’re excited to be working with Profile Design for the 2014 season,” said Mike Faello, Manager of the Surf City Cycling team. “They make an exceptional range of wheels, bars and stems that suit the preferences and strengths of all my racers.” Charon Smith, former California State Crit Champion is also looking forward to a winning season with Profile Design. “I am very impressed with how fast the Profile Design wheels roll and the consistency of the speed they keep.” Stay tuned to the team's Facebook page to get 2014 performance updates, as well as an inside look at the sport from Team Surf City Cyclery and Profile Design.




Clamp: - 31.8mm - Width: - 40, 42, 44cm Available - Drop: - -20mm/20mm - Construction: - Multi-direction, multi-layer carbon fiber - Color: - Gloss UD Carbon Black or White - Weight: - 200-210g Standard fit provides a low drop for aggressively positioned athletes who favor or fit needs dictate a low out-of-the-aerobars position which translate to fast, aggressive riding style. Flip the bar for an elevated position ideal for riders requiring higher stack in their cockpit position and higher relative pursuits. - Straight, ergonomic brake extensions help maintain control while remaining aerodynamic. - Pre-slotted internal cable routing on both sides for a clean profile. Di2 Compatible.



Svet V Base Bar


Clamp: - 31.8mm - Width: - 38, 40, 42cm Available - Drop: - 60mm - Construction: - Multi-direction, multi-layer carbon fiber - Color: - Gloss UD Carbon Black - Weight: - 200-210g Standard base bar fit provides a low drop for aggressively positioned athletes who favor or fit needs dictate a low out-of-the-aerobars position which translate to fast, aggressive riding style. Flip the base bar for an elevated position ideal for riders requiring higher stack in their cockpit position and higher relative pursuits. - Straight, ergonomic base bar brake extensions help maintain control while remaining aerodynamic. - Pre-slotted internal cable routing on both sides of the base bar for a clean profile. Di2 Compatible.